Accounting departments, absorbed by production and industry-wide projects, rarely have time to study their manual entries. That is where the quickest wins hide.
A manual entry is hardly ever a choice. It is the trace of a flow the interface cannot handle, a case the accounting scheme did not foresee, or a correction that was meant to be temporary and no longer is. Accounting departments know it; what they lack is the time to step back between two closings and two regulatory projects.
Start with the inventory, not the tool
The temptation is to pick an automation solution first. The reverse order pays better: list every manual entry over a full period, then classify them.
- by frequency: daily, monthly, closing, one-off;
- by origin: failing interface, unforeseen case, correction, reclassification;
- by volume and amount;
- by risk: which entries, if wrong, would distort a regulatory return?
That inventory alone often reveals a handful of families carrying most of the volume.
Fix at source before automating
A recurring manual entry caused by an incomplete interface should not be automated as is: the interface should be fixed. Automating a workaround makes it permanent. Genuinely off-flow cases — provisions, closing reclassifications, consolidation adjustments — are the good automation candidates.
Measure, then extend
Every family addressed must be measured: entries avoided, closing time saved, fewer reconciliation breaks. Those numbers fund the next wave — and convince teams that the project gives them time rather than taking it.